Home › Engine / Hybrid System › 3SZ-VE COOLING › RADIATOR › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002978 3SZ-VE COOLING _0015056 RADIATOR A

3SZ-VE COOLING  RADIATOR  REMOVAL  


PROCEDURE

Hide 16470A 3.DISCONNECT RADIATOR RESERVE TANK HOSE

a.
A261342

Disconnect the radiator reserve tank hose.


Hide 16571 4.REMOVE INLET RADIATOR HOSE

A261343

a.

Remove the accelerator cable clamp.


b.

Remove the 2 radiator hose clips, then remove the inlet radiator hose.


Hide 16572 5.DISCONNECT OUTLET RADIATOR HOSE

a.
A130062

Disconnect the outlet radiator hose.


Hide 32921D 6.DISCONNECT INLET OIL COOLER HOSE (for Automatic Transmission)

a.
A130064

Disconnect the inlet oil cooler hose.


Hide 32922A 7.DISCONNECT OUTLET OIL COOLER HOSE (for Automatic Transmission)

a.
A130065

Disconnect the outlet oil cooler hose.


Hide 16400 8.REMOVE RADIATOR ASSEMBLY

a.
A262242

Disconnect the cooling fan motor connector, then separate the wire harness clamp.


b.
A262244

Disconnect the accelerator control cable assembly from the fan shroud sub-assembly.


c.
A261283

Remove the 2 bolts and the 2 No. 1 radiator brackets.


d.

Remove the radiator assembly.


e.
A130068

Remove the 4 bolts and the fan shroud sub-assembly with fan.


f.

Remove the 4 grommets from the radiator.