Home › Engine / Hybrid System › K3-VE LUBRICATION › OIL AND OIL FILTER › 2011.11–2015.08
RM19Y0E _51 Engine / Hybrid System _002980 K3-VE LUBRICATION _0015064 OIL AND OIL FILTER A

K3-VE LUBRICATION  OIL AND OIL FILTER  REPLACEMENT  


CAUTION / NOTICE / HINT

CAUTION:
·

Prolonged and repeated contact with engine oil will result in the removal of natural oils from the skin, leading to dryness, irritation and dermatitis. Used engine oil contains potentially harmful contaminants which may cause skin cancer.

·

Take precautions when replacing engine oil to minimize the risk of your skin making contact with used engine oil. Wear protective clothing and gloves that cannot be penetrated by oil. Wash skin with soap and water, or use waterless hand cleaner, to completely remove any used engine oil. Do not use gasoline, thinner, or solvents.

·

Dispose of used oil and used oil filters at designated disposal sites in order to preserve the environment.



PROCEDURE

Hide 1.DRAIN ENGINE OIL

a.

Remove the oil filler cap.


b.

Remove the oil pan drain plug and drain the engine oil.


c.

Clean the drain plug.


d.

Install the drain plug with a new gasket.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)


Hide 15601 2.REMOVE OIL FILTER SUB-ASSEMBLY

a.

Using SST, remove the oil filter sub-assembly.

SST
09228-06501  


Hide 15601 3.INSTALL OIL FILTER SUB-ASSEMBLY

a.

Clean the oil filter sub-assembly installation surface.


b.

Apply engine oil to the oil filter gasket.


c.

Lightly screw the oil filter into the engine until the oil filter sub-assembly does not turn.


d.

Using SST, tighten the oil filter sub-assembly an additional 3/4 turn.

SST
09228-06501  

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 4.ADD ENGINE OIL

a.

Add fresh engine oil.

Standard Oil Grade:
Oil Grade Oil Viscosity (SAE)
API grade SL or SM or SN or ILSAC 10W-40


Oil capacity:
Item Capacity
Drain and refill with oil filter change 3.0 liters (3.2 US qts, 2.6 lmp. qts)
Drain and refill without oil filter change 2.7 liters (2.9 US qts, 2.4 lmp. qts)
Dry fill 3.4 liters (3.6 US qts, 3.0 lmp. qts)



Hide 5.INSPECT FOR OIL LEAK