Home › Drivetrain › CLUTCH › CLUTCH PEDAL(for 3SZ-VE) › 2011.11–2015.08
RM19Y0E _52 Drivetrain _002984 CLUTCH _0015091 CLUTCH PEDAL(for 3SZ-VE) A

CLUTCH  CLUTCH PEDAL(for 3SZ-VE)  INSTALLATION  


PROCEDURE

Hide 31301C 1.INSTALL CLUTCH PEDAL BUSH

C246245

a.

Apply MP grease to the inside of a clutch pedal bush.


b.

Install the clutch pedal bush onto the clutch pedal sub-assembly.

HINT:

Install the clutch pedal bush from the left side of the vehicle.



Hide 31321 2.INSTALL CLUTCH PEDAL PAD

Hide 31301B 3.INSTALL NO. 1 CLUTCH PEDAL CUSHION

a.

Install the No. 1 clutch pedal cushion onto the clutch pedal sub-assembly.


Hide 31301Q 4.INSTALL CLUTCH PEDAL SPRING BUSH

a.
C246890

Apply MP grease to the 2 clutch pedal spring bushes.


b.

Install the 2 clutch pedal spring bushes onto the clutch pedal sub-assembly.


Hide 31301 5.INSTALL CLUTCH PEDAL SUB-ASSEMBLY

C251315C01
0.083,0.083 0.354,0.281 0.271,0.198 10 *A 0.083,2.417 0.313,2.615 0.229,0.198 10 *B
*A for LHD
*B for RHD


a.

Apply MP grease to the contact surfaces between the clutch pedal sub-assembly and clutch pedal spring, and clutch pedal spring and brake pedal support sub-assembly (for LHD) or clutch pedal bracket (for RHD).


b.

Install the clutch pedal spring onto the clutch pedal sub-assembly and brake pedal support sub-assembly (for LHD) or clutch pedal bracket (for RHD).


c.

Install the clutch pedal sub-assembly onto the clutch pedal support with the clutch pedal shaft and the nut.

Torque:
19 N*m (195 kgf*cm, 14 ft.*lbf)

HINT:

Install the clutch pedal shaft from the right side of the vehicle.



Hide 6.INSTALL STOPPER BOLT

a.

Install the stopper bolt so that its end touches the No. 1 clutch pedal cushion.

HINT:

Tighten the lock nut to the specified torque when adjusting the clutch pedal sub-assembly.



Hide 31410 7.INSTALL CLUTCH MASTER CYLINDER ASSEMBLY