Home › Drivetrain › CLUTCH › CLUTCH PEDAL(for 3SZ-VE) › 2011.11–2015.08
RM19Y0E _52 Drivetrain _002984 CLUTCH _0015091 CLUTCH PEDAL(for 3SZ-VE) A

CLUTCH  CLUTCH PEDAL(for 3SZ-VE)  REMOVAL  


PROCEDURE

Hide 31410 1.REMOVE CLUTCH MASTER CYLINDER ASSEMBLY

Hide 2.REMOVE STOPPER BOLT

C246226

a.

Loosen the lock nut and remove the stopper bolt.


Hide 31301 3.REMOVE CLUTCH PEDAL SUB-ASSEMBLY

a.
C246227

Remove the nut and clutch pedal shaft.

HINT:

Hold the clutch pedal shaft and remove the nut.



b.
C251312C01
0.072,0.019 0.33,0.213 0.258,0.193 12 *A 0.055,2.414 0.29,2.608 0.235,0.193 12 *B
*A for LHD
*B for RHD


Separate the clutch pedal spring and remove the clutch pedal sub-assembly from the clutch pedal bracket.


c.

Remove the clutch pedal spring from the clutch pedal sub-assembly.


Hide 31301Q 4.REMOVE CLUTCH PEDAL SPRING BUSH

a.
C246888

Remove the 2 clutch pedal spring bushes from the clutch pedal sub-assembly.


Hide 31301B 5.REMOVE NO. 1 CLUTCH PEDAL CUSHION

a.
C246889

Remove the No. 1 clutch pedal cushion from the clutch pedal sub-assembly.


Hide 31321 6.REMOVE CLUTCH PEDAL PAD

Hide 31301C 7.REMOVE CLUTCH PEDAL BUSH

a.
C246244

Using an 8 mm hexagon wrench and a hammer, remove the clutch pedal bush.