1.REMOVE INSTRUMENT PANEL LOWER COVER
2.DISCONNECT CLUTCH RELEASE CABLE ASSEMBLY
Disconnect the clutch release cable assembly from the clutch pedal sub-assembly.
31301
3.REMOVE CLUTCH PEDAL SUB-ASSEMBLY
Remove the nut and clutch pedal shaft.
Hold the clutch pedal shaft and remove the nut.
Separate the clutch pedal spring and remove the clutch pedal sub-assembly from the brake pedal support sub-assembly (for LHD) or clutch pedal bracket (for RHD).
Remove the clutch pedal spring from the clutch pedal sub-assembly.
31301Q
4.REMOVE CLUTCH PEDAL SPRING BUSH
Remove the 2 clutch pedal spring bushes from the clutch pedal sub-assembly.
31301B
5.REMOVE NO. 1 CLUTCH PEDAL CUSHION
Remove the No. 1 clutch pedal cushion from the clutch pedal sub-assembly.
31321
6.REMOVE CLUTCH PEDAL PAD