Home › Drivetrain › CLUTCH › CLUTCH RELEASE CABLE(for K3-VE) › 2011.11–2015.08
RM19Y0E _52 Drivetrain _002984 CLUTCH _0015095 CLUTCH RELEASE CABLE(for K3-VE) A

CLUTCH  CLUTCH RELEASE CABLE(for K3-VE)  INSTALLATION  


PROCEDURE

Hide 31340 1.INSPECT CLUTCH RELEASE CABLE ASSEMBLY

C151134

a.

Ensure that the inner cable slides smoothly.


b.

Inspect the clutch release cable assembly and ensure that there is no wear, damage, deformation, cracks, etc. on any part of the cable.


Hide 31340 2.INSTALL CLUTCH RELEASE CABLE ASSEMBLY

a.

Install the clutch release cable assembly with the 2 bolts.

Torque:
11 N*m (115 kgf*cm, 8 ft.*lbf)


b.
C150626C04
2.542,1.094 2.875,0.771 false 2.917,0.677 3.115,0.865 0.198,0.188 10 *1
*1 Clutch Release Fork Sub-Assembly


Install the clutch release cable assembly onto the clutch release fork sub-assembly.

HINT:

Apply 0.5g of MP grease to the clutch release cable assembly end and the sliding parts of the clutch release lever.



c.

Install the clutch housing cover onto the clutch housing.


d.

Install the clutch release cable assembly onto the 3 clutch cable brackets.


e.

Push in the clutch release cable assembly through to the cabin.


f.

Install the clutch release cable bush and the plate washer.


g.

Install the clutch release cable assembly through to the brake pedal support sub-assembly (for LHD) or clutch pedal bracket (for RHD).


h.
C246241

Apply MP grease to the clutch release cable assembly end and pedal hook.


i.

Connect the end of the clutch release cable assembly to the clutch pedal sub-assembly.


Hide 31301 3.INSPECT AND ADJUST CLUTCH PEDAL SUB-ASSEMBLY