1.DRAIN MANUAL TRANSMISSION OIL
| *1 | Filler plug |
| *2 | Drain plug |
Remove the filler plug and the gasket.
Remove the drain plug and gasket, and then drain the manual transmission oil.
Install a new gasket and the drain plug.
2.ADD MANUAL TRANSMISSION OIL
| *a | 0 to 5 mm (0 to 0.20 in.) |
Add manual transmission oil until the oil level is within 5 mm (0.20 in.) from the bottom of the filler plug opening.
1.2 liters (1.3 US qts, 1.1 Imp. qts)
API GL-4 and SAE 80W
Install the filler plug and a new gasket.
3.INSPECT MANUAL TRANSMISSION OIL