Home › Suspension › FRONT SUSPENSION › FRONT LOWER SUSPENSION ARM
RM19Y0E _53 Suspension _002989 FRONT SUSPENSION _0015127 FRONT LOWER SUSPENSION ARM A

FRONT SUSPENSION  FRONT LOWER SUSPENSION ARM  INSTALLATION  


PROCEDURE

Hide 48069 1.TEMPORARILY TIGHTEN FRONT LOWER SUSPENSION ARM

a.

Temporarily tighten the front lower suspension arm with the bolt, 2 washers and new nut.

NOTICE:

Keep the bolt from rotating and turn the nut.



b.
C245923

Install the front lower suspension crossmember sub-assembly with 4 new bolts.

Torque:
100 N*m (1020 kgf*cm, 74 ft.*lbf)


c.
C245924

Install the front lower suspension crossmember sub-assembly with 2 new bolts.

Torque:
100 N*m (1020 kgf*cm, 74 ft.*lbf)


d.

Install the front lower suspension arm onto the steering knuckle with a new castle nut.

Torque:
68 N*m (688 kgf*cm, 50 ft.*lbf)

NOTICE:

Make sure that grease does not adhere to the threads or the tapered part.



e.

Install a new clip.


Hide 2.INSTALL FRONT WHEEL

Torque:
103 N*m (1050 kgf*cm, 76 ft.*lbf)

Hide 3. STABILIZE SUSPENSION

a.

Lower the vehicle from the jack and bounce it up and down several times to stabilize the suspension.


Hide 48069 4.FULLY TIGHTEN FRONT LOWER SUSPENSION ARM

C245926

a.

Fully tighten the nut.

Torque:
100 N*m (1020 kgf*cm, 74 ft.*lbf)

NOTICE:

Keep the bolt from rotating and turn the nut.



Hide 5.INSPECT AND ADJUST FRONT WHEEL ALIGNMENT