Home › Suspension › FRONT SUSPENSION › FRONT SUSPENSION MEMBER › 2011.11–2015.08
RM19Y0E _53 Suspension _002989 FRONT SUSPENSION _0015129 FRONT SUSPENSION MEMBER A

FRONT SUSPENSION  FRONT SUSPENSION MEMBER  REMOVAL  


PROCEDURE

Hide 48069 1.REMOVE FRONT LOWER NO.1 SUSPENSION ARM SUB-ASSEMBLY LH

Hide 45500 2.REMOVE STEERING LINK ASSEMBLY

Hide 12281A 3.INSTALL ENGINE HANGER

A137132C08
0.396,0.24 0.635,0.427 false 2.75,0.469 2.99,0.271 false 3.021,0.167 3.406,0.5 0.385,0.333 10 *1 0.188,0.146 0.573,0.51 0.385,0.365 10 *2
*1 No. 1 Engine hanger
*2 No. 2 Engine hanger


a.

Install the 2 engine hangers with the 2 bolts as illustrated.

Part No
No. 1 Engine hanger 12281-97401
No. 2 Engine hanger 12282-97403
Bolt 91671-80820


Hide 12362A 4.REMOVE FRONT ENGINE MOUNTING INSULATOR LH

a.

Attach the engine sling device to the engine hangers.


b.

Using an engine sling device and a chain block, hold the engine.


c.
C249677

Remove the 2 bolts and nuts, shown in the illustration, then remove the front engine mounting insulator LH.


Hide 12361 5.REMOVE FRONT ENGINE MOUNTING INSULATOR RH

a.

Attach the engine sling device to the engine hangers.


b.

Using an engine sling device and a chain block, hold the engine.


c.
C249678

Remove the 2 bolts and nuts, shown in the illustration, then remove the front engine mounting insulator RH.


Hide 51201 6.REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY