FAIL SAFE OPERATION
If there is a problem with sensor signals or brake actuator systems, the skid control ECU (brake actuator assembly) will prohibit power from being supplied to the brake actuator and terminate ABS control.
ABS control will be prohibited, but EBD control will continue to the extent that EBD is possible. If EBD control is impossible, the brake warning light will come on to warn the driver (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ANTI-LOCK BRAKE SYSTEM>DIAGNOSIS SYSTEM).
If a system component has any malfunction before control begins, operation is prohibited. If a system component has any malfunction during control, the system will gradually stop operating so as not to trigger a sudden change in vehicle conditions.
If it is impossible to control the systems, the warning light comes on to inform the driver of system control termination (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ANTI-LOCK BRAKE SYSTEM>DIAGNOSIS SYSTEM).
| Malfunctioning Area | Control Method |
|---|---|
| ABS | ABS control prohibited |
| EBD system | ABS and EBD control prohibited |