Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › FRONT SPEED SENSOR
RM19Y0E _54 Brake _002992 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0015139 FRONT SPEED SENSOR A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  FRONT SPEED SENSOR  INSTALLATION  


PROCEDURE

Hide 89543 1.INSTALL FRONT SPEED SENSOR

NOTICE:
·

Do not twist the sensor wire when installing.

·

Make sure that the speed sensor is installed correctly.



a.

Install the front speed sensor with the bolt.

Torque:
8.4 N*m (85 kgf*cm, 74 in.*lbf)

NOTICE:
·

Check that the front speed sensor tip and installation portion are free of foreign matter.

·

Install the front speed sensor without turning it from its original installation angle.




b.

Connect the clamp to the shock absorber.


c.

Install the sensor bracket onto the shock absorber with the bolt.

Torque:
7.4 N*m (75 kgf*cm, 65 in.*lbf)


d.

Install the sensor bracket onto the body with the bolt.

Torque:
7.4 N*m (75 kgf*cm, 65 in.*lbf)


e.

Install the grommet to the body.

NOTICE:

Make sure that the grommet is installed correctly.



f.

Connect the speed sensor connector.


g.

Connect the clamp to the body.


Hide 2.INSTALL FRONT WHEEL

Torque:
103 N*m (1050 kgf*cm, 76 ft.*lbf)