Home › Brake › BRAKE (FRONT) › FRONT BRAKE
RM19Y0E _54 Brake _002994 BRAKE (FRONT) _0015153 FRONT BRAKE G

BRAKE (FRONT)  FRONT BRAKE  INSPECTION  


PROCEDURE

Hide 1.INSPECT BRAKE CYLINDER AND PISTON

a.

Check the cylinder bore and piston for rust and scoring.

If necessary, replace the disc brake cylinder and piston.


Hide 04465 2.INSPECT PAD LINING THICKNESS

a.
C152608
1.969,0.646 2.615,0.396 false 2.656,0.323 2.896,0.5 0.24,0.177 10 *1
*1 Ruler


Using a ruler, measure the pad lining thickness.

Standard thickness:

9.0 mm (0.354 in.)


Minimum thickness:

1.0 mm (0.039 in.)


If the pad lining thickness is equal to or less than the minimum thickness, replace the disc brake pad kit.


Hide 3.INSPECT FRONT DISC BRAKE PAD SUPPORT PLATE

a.

Make sure that the disc brake pad supports have sufficient rebound, that there is no deformation, cracks or wear, and that all rust and dirt are removed.

If necessary, replace the disc brake pad support plate.


Hide 43512 4.INSPECT DISC THICKNESS

a.
C152609
1.979,1.406 2.771,0.927 false 2.813,0.823 3.063,1.01 0.25,0.188 10 *1
*1 Micrometer


Using a micrometer, measure the disc thickness.

Standard thickness:

18.0 mm (0.709 in.)


Minimum thickness:

17.0 mm (0.669 in.)


If the disc thickness is less than the minimum, replace the front disc.


Hide 43512 5.INSPECT DISC RUNOUT

a.
C152610
0.875,0.813 0.427,0.927 false 0.24,0.865 0.51,1.083 0.271,0.219 10 *1
*1 Dial Indicator


Check the bearing play in the axial direction and check for the axle hub runout (See page Drivetrain>AXLE AND DIFFERENTIAL>FRONT AXLE HUB>ON-VEHICLE INSPECTION).


b.

Using a dial indicator, measure the disc runout 10 mm (0.394 in.) away from the outer edge of the front disc.

Maximum disc runout:

0.06 mm (0.0024 in.)


If the runout exceeds the maximum value, change the installation positions of the disc and axle to make the minimum runout. If the runout exceeds the maximum even when the installation positions are changed, grind the disc. If the disc thickness is less than the minimum, replace the front disc.