Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)
RM19Y0E _56 Audio / Visual / Telematics _003000 AUDIO / VIDEO _0015166 AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)  CD Sound Skips  


PROCEDURE

1.CHECK CD
a.
I100152

Check that the CD is not deformed or cracked.

OK:

No deformation or cracks on the CD.


Result:
Proceed to
OK
NG




OK

2.CHECK CD

NG

CD IS FAULTY

2.CHECK CD
a.
I100151

Check the CD.

OK:

The CD is clean.


HINT:

If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.


NOTICE:

Do not use a conventional record cleaner or anti-static preservative.


Result:
Proceed to
OK
NG




OK

3.CHECK OPERATION USING ANOTHER CD

NG

CLEAN CD

3.CHECK OPERATION USING ANOTHER CD
a.

Check using another CD.

i.

Check if the problem recurs using another CD.

OK:

The problem does not occur.


Result:
Proceed to
OK
NG





OK

END

NG

4.CHECK STEREO COMPONENT TUNER ASSEMBLY
4.CHECK STEREO COMPONENT TUNER ASSEMBLY
a.

Replace CD with a known good one and recheck that the malfunction disappears.

OK:

Malfunction disappears.


Result:
Proceed to
OK
NG




OK

REPLACE STEREO COMPONENT TUNER ASSEMBLY

NG

REINSTALL STEREO COMPONENT TUNER ASSEMBLY PROPERLY