Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO RECEIVER › 2011.11–2015.08
RM19Y0E _56 Audio / Visual / Telematics _003000 AUDIO / VIDEO _0015167 RADIO RECEIVER A

AUDIO / VIDEO  RADIO RECEIVER  REMOVAL  


PROCEDURE

Hide 55405B 1.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

Hide 86180 2.REMOVE STEREO COMPONENT TUNER ASSEMBLY WITH BRACKET

E232852C02
0.135,0.115 0.604,0.49 0.469,0.375 10 *A 0.167,2.385 0.667,2.76 0.5,0.375 10 *B
*A for 1-DIN Type
*B for 2-DIN Type


a.

Remove the 4 screws and the stereo component tuner assembly with bracket.


b.

Disconnect the antenna plug and each connector.


Hide 86212 3.REMOVE NO. 2 RADIO BRACKET

E232853C02
0.135,0.135 0.615,0.552 0.479,0.417 10 *A 0.167,2.479 0.635,2.969 0.469,0.49 10 *B
*A for 1-DIN Type
*B for 2-DIN Type


a.

Remove the 2 screws and the No. 2 radio bracket.


Hide 86211 4.REMOVE NO. 1 RADIO BRACKET

E232854C02
0.156,0.177 0.729,0.615 0.573,0.438 10 *A 0.188,2.469 0.75,2.885 0.563,0.417 10 *B
*A for 1-DIN Type
*B for 2-DIN Type


a.

Remove the 2 screws and the No. 1 radio bracket.