Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT AIRBAG SENSOR
RM19Y0E _58 Vehicle Interior _003010 SUPPLEMENTAL RESTRAINT SYSTEMS _0015212 FRONT AIRBAG SENSOR G

SUPPLEMENTAL RESTRAINT SYSTEMS  FRONT AIRBAG SENSOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 89173A 1.CHECK FRONT AIRBAG SENSOR (for Vehicle not Involved in Collision)

Hide 89173A 2.CHECK FRONT AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag has not Deployed)


b.

When the front bumper of the vehicle or the surrounding area is damaged, check if there is any damage to the front airbag sensor. If there are any defects as mentioned below, replace the front airbag sensor with a new one:

·

Cracks, dents or chips on the sensor housing.

·

Cracks or other damage to the connector.

·

Peeling off of the label or damage to the serial number.


CAUTION:

For removal and installation of the front airbag sensor, be sure to follow the correct procedure.



Hide 89173A 3.CHECK FRONT AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag has Deployed)

a.

When airbags have deployed as the result of a collision, be certain to replace all front airbag sensor in the damaged area (anywhere in need of repair). Furthermore, it is also necessary to replace any front airbag sensor in undamaged areas that have registered a major collision, or which exhibit any of the following abnormalities:

·

Cracks, dents or chips on the sensor housing.

·

Cracks or other damage to the connector.

·

Peeling off of the label or damage to the serial number.


CAUTION:

For removal and installation of the front airbag sensor, be sure to follow the correct procedure.