The procedure described below is for the RH side. Use the same procedure for both the RH and LH side, unless otherwise specified.
73230
1.INSTALL FRONT SEAT INNER BELT ASSEMBLY (w/ Seat Belt Warning System)
| *1 | Protruding Part |
| *2 | Hook and Loop Fastener |
Install the front seat inner belt assembly with the bolt and the washer.
Do not place the front seat inner belt assembly over the protruding part of the front seat inner track.
Engage the 2 clamps.
Fasten the hook and loop fastener and close the front seat cushion cover.
Install the new band.
73230
2.INSTALL FRONT SEAT INNER BELT ASSEMBLY (w/o Seat Belt Warning System)
| *1 | Protruding Part |
| *2 | Hook and Loop Fastener |
Install the front seat inner belt assembly with the bolt and the washer.
Do not place the front seat inner belt assembly over the protruding part of the front seat inner track.
Fasten the hook and loop fastener and close the front seat cushion cover.
3.INSTALL FRONT SEAT ASSEMBLY