1.DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM
63310
2.REMOVE ROOF HEADLINING ASSEMBLY
88737A
3.REMOVE COOL BOX SUCTION TUBE
Disconnect the 2 drain hoses.
Remove the piping insulator.
Loosen the union nut and disconnect the cool box suction tube.
When removing the rear cooling unit assembly, separate the tube and the rear cooling unit assembly connection.
88726C
4.DISCONNECT C COOLER REFRIGERANT LIQUID PIPE
Loosen the union nut and disconnect the C cooler refrigerant liquid pipe.
When removing the rear cooling unit assembly, separate the pipe and the rear cooling unit assembly connection.
87030A
5.REMOVE REAR COOLING UNIT ASSEMBLY
Detach the clamp and remove the wire harness.
Remove the 5 bolts and separate the connections with the rear cooling unit assembly, the cool box suction tube and the C cooler refrigerant liquid pipe.
Seal the opening of the disconnected parts of the tube, the pipe and the cooling unit assembly using vinyl tape to prevent moisture and foreign matter from entering.
Detach the 3 claws and remove the rear cooling unit assembly.