67914B
1.REMOVE FRONT DOOR SCUFF PLATE LH
Disengage the 9 claws and remove the front door scuff plate LH.
67913B
2.REMOVE FRONT DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
67918D
3.REMOVE REAR DOOR SCUFF PLATE LH
Disengage the 2 clips and 7 claws and remove the rear door scuff plate LH.
67917C
4.REMOVE REAR DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
62414A
5.REMOVE CENTER PILLAR LOWER GARNISH LH
Remove the center pillar lower garnish LH.
62413A
6.REMOVE CENTER PILLAR LOWER GARNISH RH
Use the same procedure as for the LH side.
62312B
7.REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
Remove the front door opening trim weatherstrip LH.
62311B
8.REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
Use the same procedure as for the LH side.
62334A
9.REMOVE REAR DOOR OPENING TRIM LH (for Full-trim)
Remove the rear door opening trim LH.
62333A
10.REMOVE REAR DOOR OPENING TRIM RH (for Full-trim)
Use the same procedure as for the LH side.
62334A
11.REMOVE REAR DOOR OPENING TRIM LH (for Semi-trim)
Use the same procedure as for the rear door opening trim LH (for full-trim) and the rear door opening trim LH (for semi-trim).
62333A
12.REMOVE REAR DOOR OPENING TRIM RH (for Semi-trim)
Use the same procedure as for the LH side.
62212
13.REMOVE FRONT PILLAR GARNISH LH (for 6 Speakers)
62211
14.REMOVE FRONT PILLAR GARNISH RH (for 6 Speakers)
Use the same procedure as for the LH side.
62212
15.REMOVE FRONT PILLAR GARNISH LH (for 4 Speakers)
62211
16.REMOVE FRONT PILLAR GARNISH RH (for 4 Speakers)
Use the same procedure as for the LH side.
73237A
17.REMOVE SHOULDER BELT ANCHOR COVER
Use the same procedure as for 6 shoulder belt anchor covers. (w/o pretensioner)
Use the same procedure as for 4 shoulder belt anchor covers. (w/ pretensioner)
| *1 | Protective tape |
Using a screwdriver with its wrapped in protective tape, disengage the 2 claws and remove the shoulder belt anchor cover.
73220
18.SEPARATE FRONT SEAT OUTER BELT ASSEMBLY LH (w/o Pretensioner)
Remove the bolt and the shoulder anchor.
73210
19.SEPARATE FRONT SEAT OUTER BELT ASSEMBLY RH (w/o Pretensioner)
Use the same procedure as for the LH side.
73220
20.SEPARATE FRONT SEAT OUTER BELT ASSEMBLY LH (w/ Pretensioner)
| *1 | Protective tape |
Using a screwdriver with its wrapped in protective tape, disengage the 2 claws and remove the shoulder belt anchor cover.
Remove the bolt and the shoulder anchor.
73210
21.SEPARATE FRONT SEAT OUTER BELT ASSEMBLY RH (w/ Pretensioner)
Use the same procedure as for the LH side.
62412B
22.REMOVE CENTER PILLAR UPPER GARNISH LH
Disengage the clip and guide, and remove the center pillar upper garnish LH.
62411B
23.REMOVE CENTER PILLAR UPPER GARNISH RH
Use the same procedure as for the LH side.
67935
24.REMOVE BACK DOOR SCUFF PLATE
Disengage the 4 clips and remove the back door scuff plate.
67881A
25.REMOVE BACK DOOR WEATHERSTRIP
Remove the back door weatherstrip.
73370C
26.SEPARATE REAR NO. 1 OUTER SEAT BELT ASSEMBLY LH
Remove the bolt and the shoulder anchor.
Remove the bolt and the floor anchor plate.
73360C
27.SEPARATE REAR NO. 1 OUTER SEAT BELT ASSEMBLY RH
Use the same procedure as for the LH side.
73570
28.SEPARATE REAR NO. 2 OUTER SEAT BELT ASSEMBLY LH
Remove the bolt and the shoulder anchor.
Remove the bolt and the floor anchor plate.
73560
29.SEPARATE REAR NO. 2 OUTER SEAT BELT ASSEMBLY RH
Use the same procedure as for the LH side.
64740C
30.REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for Full-trim)
Disengage the 8 clips and the 6 claws and remove the deck trim side panel assembly LH.
64730B
31.REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for Full-trim)
Use the same procedure as for the LH side.
62639
32.REMOVE REAR QUARTER FRONT TRIM GARNISH LH
Disengage the 2 clips and claw and remove rear quarter front trim garnish LH.
62638
33.REMOVE REAR QUARTER FRONT TRIM GARNISH RH
Use the same procedure as for the LH side.
62472D
34.REMOVE REAR PILLAR UPPER GARNISH LH
Disengage the 3 clips, claw and hook, and remove the rear pillar upper garnish LH.
62471D
35.REMOVE REAR PILLAR UPPER GARNISH RH
Use the same procedure as for the LH side.
81260A
36.REMOVE MAP LIGHT ASSEMBLY (w/ Glass Case)
81260A
37.REMOVE MAP LIGHT ASSEMBLY (w/o Glass Case)
81240D
38.REMOVE NO. 2 ROOM LIGHT ASSEMBLY (w/o Intrusion Sensor)
81250
39.REMOVE NO. 2 ROOM LIGHT ASSEMBLY (w/ Intrusion Sensor)
87834
40.REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER
87810
41.REMOVE INNER REAR VIEW MIRROR
87827
42.REMOVE INNER REAR VIEW MIRROR ABSORBER
Remove the inner rear view mirror absorber.
74320
43.REMOVE VISOR ASSEMBLY LH
Detach the visor shaft from the visor holder.
Remove the screw and the visor assembly LH.
74310
44.REMOVE VISOR ASSEMBLY RH
Use the same procedure as for the visor assembly LH.
74348
45.REMOVE VISOR HOLDER
Remove the 2 claws and the 2 visor holders.
Use the same procedure for both sides.
88570F
46.REMOVE NO. 1 AIR OUTLET GRILLE SUB-ASSEMBLY (w/ Rear Air Conditioning System)
Disengage the 10 claws.
Disengage the connector and remove the No. 1 air outlet grille sub-assembly.
47.REMOVE ROOM VENT GRILLE (w/ Rear Air Conditioning System)
Disengage the 8 claws and remove the room vent grille.
74611B
48.REMOVE ASSIST GRIP
Use the same procedure for all the assist grip assemblies.
| *1 | Protective tape |
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and open the 2 covers.
Use the same procedure as for both sides.
Remove the 2 screws and the assist grip assembly.
63310
49.REMOVE ROOF HEADLINING ASSEMBLY
Disconnect the connector and 4 clamps.
Disconnect the rear washer hose and 3 clamps.
Remove the 15 clips (w/ 1 assist grip), 11 clips (w/ 3 assist grips) or 7 clips (w/ 5 assist grips).
| *1 | for LHD | *2 | for RHD |
| *3 | w/ 1 assist grips | *4 | w/ 1 or 3 assist grips |
|
Sectional View | - | - |
Illustration indicates for the roof headlining with rear air conditioning system.
Use the same procedure for the roof headlining without rear air conditioning system.
Disconnect the rear washer hose (rear side).
Remove the roof headlining from the vehicle through the back door.
Do not damage the roof headlining assembly or body interior.
Remove the roof wiring harness and rear window washer hose.
| *1 | Roof Wiring Harness | *2 | Rear Window Washer Hose |
| *3 | Tape | - | - |
63356B
50.REMOVE ROOF HEADLINING PAD LH (w/ Glass Case)
| *1 | Roof Headlining Pad LH |
|
Front Side |
Remove the 2 roof headlining pads LH.
63357B
51.REMOVE ROOF SILENCER
Remove the roof silencer.
| *1 | Roof Silencer | - | - |
|
Front Side | - | - |
63342A
52.REMOVE NO. 2 ROOF SILENCER
Remove the No. 2 roof silencers.
| *1 | Roof Silencer | - | - |
|
No. 2 Roof Silencer | - | - |