88515
1.INSTALL COOLER EXPANSION VALVE
Apply sufficient compressor oil to 2 new O-rings and the fitting surfaces of the cooler expansion valve.
ND-OIL8 or equivalent
Install the 2 new O-rings onto the No. 1 cooler evaporator sub-assembly.
Using a 4 mm hexagon wrench, install the cooler expansion valve with the 2 hexagon bolts.
88706F
2.CONNECT LIQUID TUBE SUB-ASSEMBLY
88717U
3.CONNECT SUCTION TUBE SUB-ASSEMBLY
4.CHARGE REFRIGERANT
5. WARM UP ENGINE
6.INSPECT FOR REFRIGERANT LEAK