1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
88717U
2.SEPARATE SUCTION TUBE SUB-ASSEMBLY
88706F
3.SEPARATE LIQUID TUBE SUB-ASSEMBLY
88515
4.REMOVE COOLER EXPANSION VALVE
Using a 4 mm hexagon wrench, remove the 2 hexagon bolts.
| *1 | Bolt for the Suction Tube Sub-assembly |
Temporarily attach the bolt for the suction tube sub-assembly halfway to the cooler expansion valve.
Hold the bolt and pull it to remove the cooler expansion valve.
| *1 | No. 1 Cooler Evaporator Sub-assembly |
Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.