86190C
1.INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY (w/ Steering Pad Switch)
55446E
2.INSTALL SWITCH HOLE BASE SUB-ASSEMBLY (w/ Steering Pad Switch)
Install the switch hole base sub-assembly with 2 screws.
58842A
3.INSTALL SHIFTING HOLE FRAME
Engage the 6 claws and install the shifting hole frame.
58843
4.INSTALL SHIFTING HOLE BEZEL (for Automatic Transmission)
Engage the 6 claws and install the shifting hole bezel.
58841A
5.INSTALL SHIFTING HOLE COVER (for Manual Transmission)
Engage the 6 claws and install the shifting hole cover.
58821A
6.INSTALL FRONT CONSOLE BOX
Engage the 2 claws and slide the front console box assembly in the direction indicated by the arrow in the illustration to install it.
Install the 2 bolts and 2 clips.
33504F
7.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)
Install the shift lever knob sub-assembly.
58839A
8.INSTALL CONSOLE BOX HOLE COVER (w/o Rear Console Box)
Engage the 2 guides and 4 claws, and install the console box hole cover.
58910C
9.INSTALL REAR CONSOLE BOX ASSEMBLY (w/ Rear Console Box)
| *1 | Cap |
| *2 | Bolt |
Engage the 2 guides and 2 claws and move the rear console box assembly in the direction indicated by the arrow in the illustration to install it.
Install the bolt.
Install the cap.
10.INSTALL FRONT SEAT ASSEMBLY LH
11.INSTALL FRONT SEAT ASSEMBLY RH
Use the same procedure as for the front seat assembly LH.