Use the same procedure for the LHD and RHD vehicle.
The procedure listed below is for the RHD vehicle.
85035
1.INSTALL WASHER NOZZLE SUB-ASSEMBLY
Connect a new washer nozzle sub-assembly to the washer hose.
Attach the 2 claws to install the washer nozzle sub-assembly.
55781E
2.INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
53383
3.INSTALL HOOD TO COWL TOP SEAL
53446
4.INSTALL HOOD HINGE COVER LH
53445
5.INSTALL HOOD HINGE COVER RH
85221B
6.INSTALL FRONT WIPER ARM AND BLADE LH
85211B
7.INSTALL FRONT WIPER ARM AND BLADE RH
85292B
8.INSTALL FRONT WIPER ARM HEAD CAP