Use the same procedure for the LHD and RHD vehicle.
The procedure listed below is for the RHD vehicle.
85292B
1.REMOVE FRONT WIPER ARM HEAD CAP
85221B
2.REMOVE FRONT WIPER ARM AND BLADE LH
85211B
3.REMOVE FRONT WIPER ARM AND BLADE RH
53446
4.REMOVE HOOD HINGE COVER LH
53445
5.REMOVE HOOD HINGE COVER RH
53383
6.REMOVE HOOD TO COWL TOP SEAL
55781E
7.REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
85035
8.REMOVE WASHER NOZZLE SUB-ASSEMBLY
| *1 | Protective Tape |
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the washer nozzle sub-assembly.
Remove the washer nozzle sub-assembly from the washer hose.
Washer nozzles cannot be reused.