Home › Engine / Hybrid System › 3SZ-VE FUEL › FUEL PUMP › 2014.04–2015.08
RM19Y0E _51 Engine / Hybrid System _002971 3SZ-VE FUEL _0015013 FUEL PUMP A

3SZ-VE FUEL  FUEL PUMP  REMOVAL  


PROCEDURE

Hide 77100 1.REMOVE FUEL TANK ASSEMBLY

Hide 77203A 2.DISCONNECT FUEL SUCTION TUBE SUB-ASSEMBLY

a.
A322162

Detach the fuel suction tube sub-assembly from the No. 1 fuel tube clamp.


b.
A322163C01
0.667,0.604 1.417,0.25 true 1.167,3.333 0.823,3.021 false 1.823,3.313 1.656,2.938 1.656,2.938 2.052,3.313 true 3.063,3.135 2.729,2.781 false 1.927,4.271 1.927,3.969 false 3.229,4.302 3.229,3.813 false 1.469,0.135 1.781,0.333 0.313,0.198 10 false *1 2.552,2.677 2.865,2.875 0.313,0.198 10 false *1 1.49,2.792 1.802,2.99 0.313,0.198 10 false *2 0.646,2.927 0.958,3.125 0.313,0.198 10 false *3 1.865,4.302 2.177,4.5 0.313,0.198 10 false *4 3.167,4.375 3.313,4.563 0.146,0.188 10 false *5
*1 Retainer
*2 O-ring
*3 Nylon Tube
*4 Fuel Tube Connector
*5 Fuel Pump Tube
V100135

Pinch
V100136

Pull out


Pinch the retainer to unlock it as illustrated, then pull the fuel suction tube sub-assembly (fuel tube connector) out of the fuel pump tube.

NOTICE:
·

Remove any dirt and foreign matter from the fuel tube connector.

·

Do not allow any scratches or foreign matter on the parts when disconnecting them as the fuel tube connector has O-rings that seal the fuel pump tube.

·

Perform this work by hand. Do not use any tools.

·

Do not forcibly bend, twist or turn the nylon tube.

·

Protect the disconnected parts by covering them with a plastic bag after disconnecting the fuel tube connector.

·

As some pressure remains in the fuel line, use a piece of cloth to prevent gasoline from splashing out.

·

If the fuel tube connector and fuel pump tube are stuck, pinch the fuel pump tube and push and pull the fuel tube connector to release them.




c.
A322164

Remove the retainer from the fuel pump tube.


Hide 77204A 3.DISCONNECT FUEL TANK RETURN TUBE SUB-ASSEMBLY

a.
A322165

Detach the fuel tank return tube sub-assembly from the No. 1 fuel tube clamp.


b.
A322166C01
0.646,0.688 1.51,0.219 true 1.177,3.323 0.833,2.938 false 1.833,3.292 1.677,2.906 false 2.031,3.302 1.688,2.906 false 3.063,3.135 2.688,2.708 false 1.958,4.26 1.958,3.969 false 3.208,4.271 3.208,3.813 false 1.583,0.104 1.896,0.302 0.313,0.198 10 false *1 1.49,2.823 1.802,3.021 0.313,0.198 10 false *2 2.51,2.604 2.823,2.802 0.313,0.198 10 false *1 0.656,2.833 0.969,3.031 0.313,0.198 10 false *3 1.896,4.323 2.208,4.521 0.313,0.198 10 false *4 3.135,4.333 3.292,4.542 0.156,0.208 10 false *5
*1 Retainer
*2 O-ring
*3 Nylon Tube
*4 Fuel Tube Connector
*5 Fuel Pump Tube
V100135

Pinch
V100136

Pull out


Pinch the retainer to unlock it as illustrated, then pull the fuel tank return tube sub-assembly (fuel tube connector) out of the fuel pump tube.

NOTICE:
·

Remove any dirt and foreign matter from the fuel tube connector.

·

Do not allow any scratches or foreign matter on the parts when disconnecting them as the fuel tube connector has O-rings that seal the fuel pump tube.

·

Perform this work by hand. Do not use any tools.

·

Do not forcibly bend, twist or turn the nylon tube.

·

Protect the disconnected parts by covering them with a plastic bag after disconnecting the fuel tube connector.

·

As some pressure remains in the fuel line, use a piece of cloth to prevent gasoline from splashing out.

·

If the fuel tube connector and fuel pump tube are stuck, pinch the fuel pump tube and push and pull the fuel tube connector to release them.




c.
A322167

Remove the retainer from the fuel pump tube.


Hide 23210P 4.REMOVE FUEL PUMP WITH MOTOR AND BRACKET ASSEMBLY

A322168

a.

Disconnect the fuel pump connector.


b.

Detach the clamp from the fuel tank assembly to remove the wire harness.


c.
A322169

Remove the 8 screws to remove the fuel pump bracket.


d.

Remove the fuel pump with motor and bracket assembly from the fuel tank assembly.

NOTICE:
·

Do not damage the fuel pump filter.

·

Make sure that the fuel sender gauge arm does not bend.




e.

Remove the fuel pump bracket gasket from the fuel pump with motor and bracket assembly.