45287
1.REMOVE LOWER STEERING COLUMN COVER
2.DRAIN BRAKE FLUID
Immediately wash off any brake fluid that comes into contact with any painted surface.
47201
3.REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY
44730A
4.REMOVE NO. 1 VACUUM HOSE
Slide the 2 clips and remove the No. 1 vacuum hose from the brake booster and vacuum pipe.
47264D
5.SEPARATE BRAKE MASTER CYLINDER PUSH ROD CLEVIS
Remove the clip and push rod pin and separate the push rod clevis from the brake pedal sub-assembly.
44610
6.REMOVE BRAKE BOOSTER ASSEMBLY
Remove the 4 nuts and remove the brake booster assembly.
Remove the gasket from the brake booster assembly.
47264D
7.REMOVE BRAKE MASTER CYLINDER PUSH ROD CLEVIS
Loosen the push rod lock nut and remove the brake master cylinder push rod clevis.