86211
1.INSTALL NO. 1 RADIO BRACKET
w/o USB Audio System:
Install the radio tuner opening cover, No. 1 radio bracket and radio receiver panel to the stereo component tuner assembly with the 3 screws.
| *1 | Boss |
w/ USB Audio System:
Align the 2 bosses of the No. 1 radio bracket with the holes in the stereo component tuner assembly and install the No. 1 radio bracket with the 2 screws.
86212
2.INSTALL NO. 2 RADIO BRACKET
w/o USB Audio System:
Install the radio tuner opening cover, No. 2 radio bracket and radio receiver panel to the stereo component tuner assembly with the 3 screws.
| *1 | Boss |
w/ USB Audio System:
Align the 2 bosses of the No. 2 radio bracket with the holes in the stereo component tuner assembly and install the No. 2 radio bracket with the 2 screws.
86180
3.INSTALL STEREO COMPONENT TUNER ASSEMBLY WITH BRACKET
Connect the antenna plug and each connector.
Install the stereo component tuner assembly with the bracket to the instrument panel with the 4 screws.
55412D
4.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY