Use the same procedure for the RHD and LHD vehicles.
The procedure listed below is for the RHD vehicle.
1.REMOVE FRONT CONSOLE BOX
55432B
2.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL
85530
3.REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
| *1 | Protective Tape |
Using a screwdriver with its tip wrapped in protective tape, disengage the claw, then turn the No. 1 power outlet socket assembly counterclockwise and pull the No. 1 power outlet socket assembly as shown in the illustration.
85535E
4.REMOVE NO. 2 POWER OUTLET SOCKET COVER
Disengage the 2 claws to remove the No. 2 power outlet socket cover.