All bolts, screws and nuts relevant to installing and removing the instrument panel are shown along with their alphabet code in the table below.
1. FRONT WHEELS FACING STRAIGHT AHEAD
55301
2.REMOVE INSTRUMENT PANEL SUB-ASSEMBLY
83100
3.REMOVE COMBINATION METER ASSEMBLY
4.REMOVE FRONT CONSOLE BOX
84941A
5.REMOVE SWITCH BASE
55606
6.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Remove the 3 clips.
Disengage the 3 guides to remove the No. 1 instrument panel under cover sub-assembly.
55608
7.REMOVE NO. 3 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Use the same procedure for the No. 1 instrument panel under cover sub-assembly.
55642
8.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER
Disengage the 4 claws and 2 guides to remove the No. 2 instrument panel under cover.
55458B
9.REMOVE INSTRUMENT LOWER COVER
Remove the screw <A>.
Disengage the 2 claws to remove the instrument lower cover.
55476C
10.REMOVE INSTRUMENT PANEL FINISH PLATE GARNISH
Disengage the 5 claws to remove the instrument panel finish plate garnish.
55420A
11.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
Disengage the 4 claws and 2 guides to remove the center instrument cluster finish panel assembly.
55545
12.REMOVE FUSE BOX OPENING COVER
Disengage the 7 claws to remove the fuse box opening cover.
84870A
13.REMOVE OUTER MIRROR SWITCH ASSEMBLY (w/ Power Mirror Control System)
55547
14.REMOVE REMOTE CONTROL MIRROR HOLE COVER (w/o Power Mirror Control System)
Disengage the 4 claws to remove the remote control mirror hole cover.
84790
15.REMOVE REAR WINDOW DEFOGGER SWITCH ASSEMBLY (w/ Rear Window Defogger)
55539E
16.REMOVE SPARE SWITCH HOLE COVER (w/o Rear Window Defogger)
Disengage the 2 claws to remove the spare switch hole cover.
55539E
17.REMOVE SPARE SWITCH HOLE COVER
Disengage the 2 claws to remove the spare switch hole cover.
55561A
18.REMOVE GLOVE COMPARTMENT DOOR LOCK STRIKER
|
Bolt <B> |
|
Screw <A> |
Remove the bolt <B>.
Remove the screw <A> and the glove compartment door lock striker.
55432B
19.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL
Disengage the 4 claws and 5 guides to disconnect the lower instrument panel finish panel.
Disconnect each connector.
Disengage the clamp to remove the lower instrument panel finish panel.
86190C
20.REMOVE STEREO JACK ADAPTER ASSEMBLY (w/ USB Audio System)
55539
21.REMOVE SPARE SWITCH HOLE COVER (w/o USB Audio System)
Disengage the 2 claws to remove the spare switch hole cover.
85530
22.REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
85535E
23.REMOVE NO. 2 POWER OUTLET SOCKET COVER
86316
24.REMOVE ANTENNA CABLE
55312
25.REMOVE LOWER INSTRUMENT PANEL
Disconnect each connector and disengage the clamp.
Remove the 6 bolts <B>, 2 bolts <D> and the lower instrument panel.