55312
1.INSTALL LOWER INSTRUMENT PANEL
Install the lower instrument panel with the 6 bolts <B> and 2 bolts <D>.
Connect each connector and engage the clamp.
86316
2.INSTALL ANTENNA CABLE
85535E
3.INSTALL NO. 2 POWER OUTLET SOCKET COVER
85530
4.INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY
55539
5.INSTALL SPARE SWITCH HOLE COVER (w/o USB Audio System)
Engage the 2 claws to install the spare switch hole cover.
86190C
6.INSTALL STEREO JACK ADAPTER ASSEMBLY (w/ USB Audio System)
55432B
7.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL
Engage the clamp.
Connect each connector.
Engage the 5 guides and 4 claws to install the lower instrument panel finish panel.
55561A
8.INSTALL GLOVE COMPARTMENT DOOR LOCK STRIKER
Install the glove compartment door lock striker with the bolt <B> and screw <A>.
55539E
9.INSTALL SPARE SWITCH HOLE COVER
Engage the 2 claws to install the spare switch hole cover.
55539E
10.INSTALL SPARE SWITCH HOLE COVER (w/o Rear Window Defogger)
Engage the 2 claws to install the spare switch hole cover.
84790
11.INSTALL REAR WINDOW DEFOGGER SWITCH ASSEMBLY (w/ Rear Window Defogger)
55547
12.INSTALL REMOTE CONTROL MIRROR HOLE COVER (w/o Power Mirror Control System)
Engage the 4 claws to install the remote control mirror hole cover.
84870A
13.INSTALL OUTER MIRROR SWITCH ASSEMBLY (w/ Power Mirror Control System)
55545
14.INSTALL FUSE BOX OPENING COVER
Engage the 7 claws to install the fuse opening cover.
55420A
15.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
Engage the 2 guide and 4 claws to install the center instrument cluster finish panel assembly.
55476C
16.INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH
Engage the 5 claws to install the instrument panel finish plate garnish.
55458B
17.INSTALL INSTRUMENT LOWER COVER
Engage the 2 claws.
Install the instrument lower cover with the screw <A>.
55642
18.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER
Engage the 2 guides and 4 claws to install the No. 2 instrument panel under cover.
55606
19.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Engage the 3 guides.
Install the No. 1 instrument panel under cover sub-assembly with the 3 clips.
55608
20.INSTALL NO. 3 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Use the same procedure for the No. 1 instrument panel under cover sub-assembly.
84941A
21.INSTALL SWITCH BASE
22.INSTALL FRONT CONSOLE BOX
83100
23.INSTALL COMBINATION METER ASSEMBLY
55301
24.INSTALL INSTRUMENT PANEL SUB-ASSEMBLY