Home › Engine / Hybrid System › 1NR-VE ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE › from 2015.08
RM19Y0E _51 Engine / Hybrid System _042271 1NR-VE ENGINE CONTROL _0196151 CAMSHAFT OIL CONTROL VALVE A

1NR-VE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  INSTALLATION  


PROCEDURE

Hide 11101J 1.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.

for Exhaust Side

i.
A197830C01
1.344,0.396 1.656,0.552 0.313,0.156 10 *1
*1 O-ring


Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly.

NOTICE:

Do not damage the O-ring.



ii.

Install the camshaft timing oil control valve assembly to the cylinder head cover sub-assembly with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If a component has been dropped or subjected to a strong impact, replace it.

·

Do not allow foreign matter to contact the O-ring face of the camshaft timing oil control valve assembly (connecting surface with cylinder head cover sub-assembly).

·

Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control valve assembly.




iii.

Connect the camshaft timing oil control valve assembly connector.


iv.

Engage the claw and install the cover.



b.

for Intake Side

i.
A197830C01
1.344,0.396 1.656,0.552 0.313,0.156 10 *1
*1 O-ring


Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly.

NOTICE:

Do not damage the O-ring.



ii.

Install the camshaft timing oil control valve assembly to the cylinder head cover sub-assembly with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If a component has been dropped or subjected to a strong impact, replace it.

·

Do not allow foreign matter to contact the O-ring face of the camshaft timing oil control valve assembly (connecting surface with cylinder head cover sub-assembly).

·

Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control valve assembly.




iii.

Connect the camshaft timing oil control valve assembly connector.