Home › Engine / Hybrid System › 1NR-VE ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR › from 2015.08
RM19Y0E _51 Engine / Hybrid System _042271 1NR-VE ENGINE CONTROL _0196159 ENGINE COOLANT TEMPERATURE SENSOR A

1NR-VE ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 1.REMOVE ENGINE AND TRANSMISSION ASSEMBLY

Hide 89422A 2.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

a.
A353478

Disconnect the engine coolant temperature sensor connector.


b.
A353479C01
1.542,0.896 2.042,0.625 true 2.104,0.531 2.417,0.688 0.313,0.156 10 false *a
*a 19 mm Deep Socket Wrench


Using a 19 mm deep socket wrench, remove the engine coolant temperature sensor from the cylinder head sub-assembly.

NOTICE:

If a component has been dropped or subjected to a strong impact, replace it.



c.

Remove the gasket from the engine coolant temperature sensor.