77775
1.REMOVE CHARCOAL CANISTER OUTLET GUIDE (for RHD)
Move the charcoal canister outlet guide in the direction of the arrow (1) until it clicks, and then remove it by pulling it in the direction of the arrow (2).
12262
2.REMOVE NO. 2 VENTILATION HOSE
Loosen the clip and remove the No. 2 ventilation hose.
16267
3.REMOVE NO. 3 WATER BY-PASS HOSE
Loosen the clip and remove the No. 3 water by-pass hose.
16264
4.REMOVE NO. 2 WATER BY-PASS HOSE (w/ Heater)
Loosen the clip and remove the No. 2 water by-pass hose.
16261
5.REMOVE WATER BY-PASS HOSE (w/ Heater)
Loosen the clip and remove the water by-pass hose.
16261
6.REMOVE WATER BY-PASS HOSE (w/o Heater)
Loosen the 2 clips and remove the water by-pass hose.
16267D
7.REMOVE 3-WAY
Loosen the clip and remove the 3-way.
16282
8.REMOVE NO. 5 WATER BY-PASS HOSE
Loosen the clip and remove the No. 5 water by-pass hose.
9.REMOVE HARNESS BRACKET
Remove the bolt and harness bracket.
23842A
10.REMOVE EFI FUEL PIPE CLAMP
23901
11.REMOVE FUEL TUBE SUB-ASSEMBLY
23814B
12.REMOVE FUEL DELIVERY PIPE
23807V
13.REMOVE NO. 1 DELIVERY PIPE SPACER
23291
14.REMOVE INJECTOR VIBRATION INSULATOR
23250
15.REMOVE FUEL INJECTOR ASSEMBLY
88431
16.REMOVE NO. 1 COMPRESSOR MOUNTING BRACKET (w/ Air Conditioning System)
Remove the 4 bolts and No. 1 compressor mounting bracket.
16603
17.REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY (w/ Air Conditioning System)
| *1 | Idler Pulley Plate |
| *2 | No. 1 Idler Pulley Sub-assembly |
| *3 | Idler Pulley Spacer |
Remove the bolt, idler pulley plate, No. 1 idler pulley sub-assembly and idler pulley spacer.
16620
18.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY
| *A | w/o Air Conditioning System |
| *B | w/ Air Conditioning System |
Remove the 2 bolts and V-ribbed belt tensioner assembly.
16281
19.REMOVE NO. 4 WATER BY-PASS HOSE
Loosen the clip and remove the No. 4 water by-pass hose.