Home › Engine / Hybrid System › 2NR-VE ENGINE MECHANICAL › ENGINE UNIT › from 2015.08
RM19Y0E _51 Engine / Hybrid System _042274 2NR-VE ENGINE MECHANICAL _0196194 ENGINE UNIT A

2NR-VE ENGINE MECHANICAL  ENGINE UNIT  REMOVAL  


PROCEDURE

Hide 77775 1.REMOVE CHARCOAL CANISTER OUTLET GUIDE (for RHD)

a.
A364925N01
1.698,0.083 1.854,0.281 0.156,0.198 10 true 2 1.917,0.917 2.073,1.115 0.156,0.198 10 true 1

Move the charcoal canister outlet guide in the direction of the arrow (1) until it clicks, and then remove it by pulling it in the direction of the arrow (2).


Hide 12262 2.REMOVE NO. 2 VENTILATION HOSE

a.
A362981

Loosen the clip and remove the No. 2 ventilation hose.


Hide 16267 3.REMOVE NO. 3 WATER BY-PASS HOSE

a.
A362982

Loosen the clip and remove the No. 3 water by-pass hose.


Hide 16264 4.REMOVE NO. 2 WATER BY-PASS HOSE (w/ Heater)

a.
A363887

Loosen the clip and remove the No. 2 water by-pass hose.


Hide 16261 5.REMOVE WATER BY-PASS HOSE (w/ Heater)

a.
A363888

Loosen the clip and remove the water by-pass hose.


Hide 16261 6.REMOVE WATER BY-PASS HOSE (w/o Heater)

a.
A362983

Loosen the 2 clips and remove the water by-pass hose.


Hide 16267D 7.REMOVE 3-WAY

a.
A363056

Loosen the clip and remove the 3-way.


Hide 16282 8.REMOVE NO. 5 WATER BY-PASS HOSE

A362984

a.

Loosen the clip and remove the No. 5 water by-pass hose.


Hide 9.REMOVE HARNESS BRACKET

a.
A362985

Remove the bolt and harness bracket.


Hide 23842A 10.REMOVE EFI FUEL PIPE CLAMP

Hide 23901 11.REMOVE FUEL TUBE SUB-ASSEMBLY

Hide 23814B 12.REMOVE FUEL DELIVERY PIPE

Hide 23807V 13.REMOVE NO. 1 DELIVERY PIPE SPACER

Hide 23291 14.REMOVE INJECTOR VIBRATION INSULATOR

Hide 23250 15.REMOVE FUEL INJECTOR ASSEMBLY

Hide 88431 16.REMOVE NO. 1 COMPRESSOR MOUNTING BRACKET

a.
A362986

Remove the 4 bolts and No. 1 compressor mounting bracket.


Hide 16603 17.REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY

a.
A362987C01
1.458,0.448 1.313,0.229 true 2.667,0.917 2.5,0.698 false 2.427,0.198 2.198,0.333 false 2.719,0.885 3.031,1.042 0.313,0.156 10 false *1 2.469,0.104 2.781,0.26 0.313,0.156 10 false *2 1.167,0.063 1.479,0.219 0.313,0.156 10 false *3
*1 Idler Pulley Plate
*2 No. 1 Idler Pulley Sub-assembly
*3 Idler Pulley Spacer


Remove the bolt, idler pulley plate, No. 1 idler pulley sub-assembly and idler pulley spacer.


Hide 16620 18.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

a.
A362988

Remove the 2 bolts and V-ribbed belt tensioner assembly.


Hide 16281 19.REMOVE NO. 4 WATER BY-PASS HOSE

a.
A362989

Loosen the clip and remove the No. 4 water by-pass hose.