77100
1.REMOVE FUEL TANK ASSEMBLY
77203A
2.REMOVE FUEL SUCTION TUBE SUB-ASSEMBLY
| *1 | Retainer |
| *2 | O-ring |
| *3 | Nylon Tube |
| *4 | Fuel Tube Connector |
| *5 | Fuel Pump Tube |
|
Pinch |
|
Pull out |
Pinch the retainer to unlock it as illustrated, then pull the fuel suction tube sub-assembly out of the fuel pump tube.
Remove any dirt and foreign matter from the fuel tube connector.
Do not allow any scratches or foreign matter on the parts when disconnecting them as the fuel tube connector has O-rings that seal the fuel pump tube.
Perform this work by hand. Do not use any tools.
Do not forcibly bend, twist or turn the nylon tube.
Protect the disconnected parts by covering them with a plastic bag after disconnecting the fuel tube connector.
As some pressure remains in the fuel line, use a piece of cloth to prevent gasoline from splashing out.
If the fuel tube connector and fuel pump tube are stuck, pinch the fuel pump tube and push and pull the fuel tube connector to release them.
Remove the retainer from the fuel pump tube.
Detach the fuel suction tube sub-assembly from the No. 1 fuel tube clamp.
Detach the fuel suction tube sub-assembly from the No. 2 fuel tube clamp.
| *1 | Retainer |
| *2 | O-ring |
| *3 | Fuel Tube Connector |
| *4 | Fuel Filter Tube |
| *5 | Nylon Tube |
|
Pinch |
|
Pull out |
Pinch the retainer to unlock it as illustrated, then pull the fuel suction tube sub-assembly out of the fuel filter tube.
Remove any dirt and foreign matter from the fuel tube connector.
Do not allow any scratches or foreign matter on the parts when disconnecting them as the fuel tube connector has O-rings that seal the fuel filter tube.
Perform this work by hand. Do not use any tools.
Do not forcibly bend, twist or turn the nylon tube.
Protect the disconnected parts by covering them with a plastic bag after disconnecting the fuel tube connector.
As some pressure remains in the fuel line, use a piece of cloth to prevent gasoline from splashing out.
If the fuel tube connector and fuel filter tube are stuck, pinch the fuel filter tube and push and pull the fuel tube connector to release them.
77204A
3.REMOVE FUEL TANK RETURN TUBE
| *1 | Retainer |
| *2 | O-ring |
| *3 | Nylon Tube |
| *4 | Fuel Tube Connector |
| *5 | Fuel Pump Tube |
|
Pinch |
|
Pull out |
Pinch the retainer to unlock it as illustrated, then pull the fuel tank return tube out of the fuel pump tube.
Remove any dirt and foreign matter from the fuel tube connector.
Do not allow any scratches or foreign matter on the parts when disconnecting them as the fuel tube connector has O-rings that seal the fuel pump tube.
Perform this work by hand. Do not use any tools.
Do not forcibly bend, twist or turn the nylon tube.
Protect the disconnected parts by covering them with a plastic bag after disconnecting the fuel tube connector.
As some pressure remains in the fuel line, use a piece of cloth to prevent gasoline from splashing out.
If the fuel tube connector and fuel pump tube are stuck, pinch the fuel pump tube and push and pull the fuel tube connector to release them.
Remove the retainer from the fuel pump tube.
Detach the fuel tank return tube from the No. 1 fuel tube clamp.
Detach the fuel tank return tube from the No. 2 fuel tube clamp.
| *1 | Retainer |
| *2 | O-ring |
| *3 | Fuel Tube Connector |
| *4 | Fuel Filter Tube |
| *5 | Nylon Tube |
|
Pinch |
|
Pull out |
Pinch the retainer to unlock it as illustrated, then pull the fuel tank return tube out of the fuel filter tube.
Remove any dirt and foreign matter from the fuel tube connector.
Do not allow any scratches or foreign matter on the parts when disconnecting them as the fuel tube connector has O-rings that seal the fuel filter tube.
Perform this work by hand. Do not use any tools.
Do not forcibly bend, twist or turn the nylon tube.
Protect the disconnected parts by covering them with a plastic bag after disconnecting the fuel tube connector.
As some pressure remains in the fuel line, use a piece of cloth to prevent gasoline from splashing out.
If the fuel tube connector and fuel filter tube are stuck, pinch the fuel filter tube and push and pull the fuel tube connector to release them.
77020A
4.REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
Disconnect the fuel pump connector.
Remove the 8 screws and No. 1 fuel pump bracket.
Remove the fuel suction tube with pump and gauge assembly from the fuel tank assembly.
Do not damage the fuel pump filter.
Make sure that the fuel sender gauge arm does not bend.
Remove the fuel pump bracket gasket from the fuel suction tube with pump and gauge assembly.