Use the same procedure for the RHD and LHD vehicles.
The procedure listed below is for the RHD vehicle.
85292B
1.REMOVE FRONT WIPER ARM HEAD CAP
85211B
2.REMOVE FRONT WIPER ARM AND BLADE RH
85221B
3.REMOVE FRONT WIPER ARM AND BLADE LH
53445
4.REMOVE HOOD HINGE COVER RH
53446
5.REMOVE HOOD HINGE COVER LH
55781E
6.REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
85035
7.REMOVE FRONT WASHER NOZZLE
| *1 | Protective Tape |
Disconnect the washer hose from the front washer nozzle.
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws to remove the front washer nozzle.
Front washer nozzles cannot be reused.
Use the same procedure for both sides.