Home › Drivetrain › CLUTCH › CLUTCH PEDAL(for 1NR-VE) › from 2015.08
RM19Y0E _52 Drivetrain _002984 CLUTCH _0197226 CLUTCH PEDAL(for 1NR-VE) A

CLUTCH  CLUTCH PEDAL(for 1NR-VE)  REMOVAL  


PROCEDURE

Hide 55458B 1.REMOVE INSTRUMENT PANEL LOWER COVER (for RHD)

Click hereVehicle Interior>INTERIOR PANELS / TRIM>LOWER INSTRUMENT PANEL>REMOVAL

HINT:

Use the same procedure as for the LH side.


Hide 84520 2.REMOVE CLUTCH START SWITCH ASSEMBLY

a.
C335868C01
0.135,0.104 0.448,0.302 0.313,0.198 10 false *A 0.167,2.281 0.479,2.479 0.313,0.198 10 false *B
*A for LHD
*B for RHD


Detach the 2 harness clamps from the clutch pedal bracket. (for RHD)


b.

Disconnect the connector from the clutch start switch assembly.


c.

Loosen the lock nut and remove the clutch start switch assembly.


Hide 31340 3.DISCONNECT CLUTCH RELEASE CABLE ASSEMBLY

C246241

a.

Disconnect the clutch release cable assembly from the clutch pedal sub-assembly.


Hide 31301 4.REMOVE CLUTCH PEDAL SUB-ASSEMBLY

a.
C331597

Remove the nut and clutch pedal shaft.

HINT:

Hold the clutch pedal shaft and remove the nut.



b.
C335861C01
0.115,0.094 0.427,0.292 0.313,0.198 10 false *A 0.135,2.479 0.448,2.677 0.313,0.198 10 false *B
*A for LHD
*B for RHD


Separate the clutch pedal spring and remove the clutch pedal sub-assembly from the clutch pedal bracket.


c.

Remove the clutch pedal spring from the clutch pedal sub-assembly.


Hide 31301Q 5.REMOVE CLUTCH PEDAL SPRING BUSH

a.
C331599

Remove the 2 clutch pedal spring bushes from the clutch pedal sub-assembly.


Hide 31301B 6.REMOVE NO. 1 CLUTCH PEDAL CUSHION

a.
C335862C01
0.135,0.104 0.448,0.302 0.313,0.198 10 false *A 0.156,2.615 0.469,2.813 0.313,0.198 10 false *B
*A for LHD
*B for RHD


Remove the No. 1 clutch pedal cushion from the clutch pedal sub-assembly.


Hide 31321 7.REMOVE CLUTCH PEDAL PAD