31301C
1.INSTALL CLUTCH PEDAL BUSH
Apply MP grease to the inside of clutch pedal bush.
Install the clutch pedal bush onto the clutch pedal sub-assembly.
Install the clutch pedal bush from the left side of the vehicle.
31321
2.INSTALL CLUTCH PEDAL PAD
31301B
3.INSTALL NO. 1 CLUTCH PEDAL CUSHION
Install the No. 1 clutch pedal cushion onto the clutch pedal sub-assembly.
31301Q
4.INSTALL CLUTCH PEDAL SPRING BUSH
Apply MP grease to the 2 clutch pedal spring bushes.
Install the 2 clutch pedal spring bushes onto the clutch pedal sub-assembly.
31301
5.INSTALL CLUTCH PEDAL SUB-ASSEMBLY
| *A | LHD |
| *B | RHD |
Apply MP grease to the contact surfaces between the clutch pedal sub-assembly and clutch pedal spring, and clutch pedal bracket and clutch pedal spring.
Install the clutch pedal spring onto the clutch pedal sub-assembly and clutch pedal bracket.
Apply MP grease to the clutch pedal shaft flange.
Install the clutch pedal sub-assembly onto the clutch pedal support with the clutch pedal shaft and the nut.
Hold the clutch pedal shaft and tighten the nut.
Install the clutch pedal shaft from the right side of the vehicle.
84520
6.INSTALL CLUTCH START SWITCH ASSEMBLY (for RHD)
Install the clutch start switch assembly so that its end touches the No. 1 clutch pedal cushion.
Tighten the lock nut to the specified torque when adjusting the clutch pedal sub-assembly.
31410
7.INSTALL CLUTCH MASTER CYLINDER ASSEMBLY