51441
1.REMOVE NO. 1 ENGINE UNDER COVER
84520
2.REMOVE CLUTCH START SWITCH ASSEMBLY
31340
3.REMOVE CLUTCH RELEASE CABLE ASSEMBLY
Disconnect the end of the clutch release cable assembly from the clutch pedal sub-assembly.
Pull the clutch release cable assembly through from the clutch pedal bracket.
Remove the clutch release cable bush and washer plate.
for LHD
Release the clutch release cable assembly from the 4 clutch cable brackets.
for RHD
Release the clutch release cable assembly from the 3 clutch cable brackets.
Remove the bolt and clutch cable bracket.
Pull the clutch release cable assembly through to the engine room.
Remove the clutch housing cover from the clutch housing.
| *1 | Adjusting Nut |
Disconnect the clutch release cable assembly from the clutch release fork sub-assembly.
If necessary, loosen the adjusting nut in advance.
Pushing the clutch release fork sub-assembly toward the front of the vehicle will make it easier to remove the clutch release cable assembly.
Remove the 2 bolts and the clutch release cable assembly from the clutch housing.