The power steering ECU assembly receives signals from the ECM and combination meter assembly via CAN communication.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate | Return-to-normal Condition | Note |
|---|---|---|---|---|---|---|
| U0100/61 | CAN Communication Error (EFI) | ECM communication error | ·
CAN communication system ·
ECM |
The warning light does not illuminate (normal reset) | Ignition switch ON again or after system confirmed to be normal | - |
| U0155/62 | CAN Communication Error (meter) | Combination meter communication error | ·
CAN communication system ·
Combination meter assembly |
The warning light does not illuminate (normal reset) | Ignition switch ON again or after system confirmed to be normal | - |
Go to CAN communication system.
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
| Proceed to |
|---|
| NEXT |
NEXT