Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM › from 2015.08
RM19Y0E _58 Vehicle Interior _003005 DOOR LOCK _0015187 WIRELESS DOOR LOCK CONTROL SYSTEM D

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM  SYSTEM DESCRIPTION  


WIRELESS DOOR LOCK CONTROL SYSTEM DESCRIPTION


a.

The wireless door lock control system locks/unlocks the doors remotely. This system has the following features:

·

The main body ECU (fuse block assembly) performs the code identification process and operates the door lock control.

·

A door control transmitter assembly is used and contains the following 2 switches: the door lock switch and door unlock switch.




FUNCTION OF MAIN COMPONENTS


Components Functions
Door control transmitter assembly
·

Contains the lock and unlock switches.

·

Transmits the weak radio waves (recognition codes and function codes) to the main body ECU (fuse block assembly).


·

Courtesy light switch (for front LH side)

·

Courtesy light switch (for front RH side)

·

Courtesy light switch (for rear LH side)*

·

Courtesy light switch (for rear RH side)*

·

Back door lock assembly (back door courtesy light switch)


·

Located on each door.

·

Outputs door status signals (open or closed) to the main body ECU (fuse block assembly).


Steering column upper with switch bracket assembly (unlock warning switch) Detects if the key is inserted in the ignition key cylinder or not.
·

Front door lock assembly LH

·

Front door lock assembly RH

·

Rear door lock assembly LH

·

Rear door lock assembly RH

·

Back door lock assembly


Operates the motor in response to signals from the main body ECU (fuse block assembly) and locks and unlocks the doors.
Main body ECU (fuse block assembly)
·

Receives weak radio waves from the door control transmitter assembly.

·

Sends wireless door lock control signals in response to the code data from the signals from each switch.




*: w/ Rear Door Courtesy Light Switch


SYSTEM FUNCTION


a.

The door control transmitter assembly has the lock and unlock switches. Operating these switches activates each function.

The wireless door lock control system has the following functions:

HINT:

The default settings of the following functions are on. Part of these functions can be customized.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM>CUSTOMIZE PARAMETERS


Function Outline
All door lock function Pressing the lock switch locks all the doors.
All door unlock function Pressing the unlock switch unlocks all the doors.
Answer-back function
w/o Theft Warning ECU Assembly
·

When the doors are locked by a wireless operation, the hazard warning lights flash once.

·

When the doors are unlocked by a wireless operation, the hazard warning lights flash twice.


w/ Theft Warning ECU Assembly
·

When the doors are locked by a wireless operation, the hazard warning lights flash once and security buzzer sounds once.

·

When the doors are unlocked by a wireless operation, the hazard warning lights flash twice and security buzzer sounds twice.


Automatic lock function If no doors are opened within 30*1 or 40*2 seconds after they are unlocked by the door control transmitter, all the doors (including the back door) lock again automatically.
Illuminated entry function
·

When the map light and No. 2 room light door switch is on and all the doors are locked, pressing the unlock switch causes the interior light to illumination turn on and driver side door to unlock simultaneously.

·

If the doors have not been opened, the map light assembly and No.2 room light assembly turns off in approximately 15 seconds.


Panic alarm function*2 Pressing the lock switch of the door control transmitter for more than approximately 1.5 seconds causes the following alarms to activate:
·

Sounds the security buzzer.

·

Flashes the hazard warning lights.

·

Illuminate the map light assembly and No. 2 room light assembly.


Transmitter recognition code registration Enables registration (writing and storing) of door control transmitter assembly recognition codes in the main body ECU (fuse block assembly).

*1: w/o Theft Warning ECU Assembly

*2: w/ Theft Warning ECU Assembly




CONDITIONS THAT WIRELESS FUNCTIONS DO NOT OPERATE


a.

The lock function will not operate when either of the following conditions is met:

·

Any of the doors is open.*1

·

Driver side or front passenger side doors is open.*2

·

The key is inserted in the ignition key cylinder.

*1: w/ Rear Door Courtesy Light Switch

*2: w/o Rear Door Courtesy Light Switch




b.

The unlock function will not operate when the following condition is met:

·

The key is inserted in the ignition key cylinder.