Home › Engine / Hybrid System › 2ZR-FXE (FUEL) › FUEL PRESSURE REGULATOR
RM32K0E _51 Engine / Hybrid System _060063 2ZR-FXE FUEL _0294217 FUEL PRESSURE REGULATOR A

2ZR-FXE FUEL  FUEL PRESSURE REGULATOR  INSTALLATION  


PROCEDURE

Hide 23280J 1.INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

a.

Apply gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.


b.

Install the fuel pressure regulator assembly to the fuel suction tube with pump and gauge assembly.

NOTICE:

Make sure that the O-rings are not cut or pinched during installation.



c.

Install the No. 3 fuel suction support to the fuel suction tube with pump and gauge assembly.


Hide 77020A 2.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY