Home › Engine / Hybrid System › 2ZR-FXE (FUEL) › FUEL PUMP › 2016.10–2018.05
RM32K0E _51 Engine / Hybrid System _060063 2ZR-FXE FUEL _0294218 FUEL PUMP A

2ZR-FXE FUEL  FUEL PUMP  REASSEMBLY  


PROCEDURE

Hide 23221 1.INSTALL FUEL PUMP

HINT:

Perform "Inspection After Repair" after replacing the fuel pump.

Click hereEngine / Hybrid System>2ZR-FXE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


a.
A344815C05
1.313,0.271 1.448,0.271 1.448,0.271 1.615,0.49 false 1.198,0.635 1.625,0.635 true 1.135,0.219 1.448,0.375 0.313,0.156 10 false *1 1.01,0.563 1.323,0.719 0.313,0.156 10 false *2
*1 O-ring
*2 Fuel Pump Spacer


Apply gasoline to a new O-ring. Then install the O-ring and fuel pump spacer to the fuel pump.


b.

Engage the 3 claws to install the fuel pump to the No. 1 fuel suction support.


c.

Engage the 4 claws to install the fuel pump to the fuel sub-tank sub-assembly.

NOTICE:
·

Make sure that the O-ring is not cut or pinched during the installation.

·

Engage the claws securely.




d.
A395514C02
2.583,1.25 3.021,0.604 true 2.427,1.302 2.25,0.75 2.25,0.75 2.083,0.75 true 1.865,0.635 2.052,0.823 0.188,0.188 10 true *a 3.083,0.51 3.281,0.698 0.198,0.188 10 true *b
*a Protrusion
*b Installation Hole
V100135

Slide


Align the protrusion of the fuel sub-tank sub-assembly with the installation hole of the plate sub-assembly and then slide the plate sub-assembly to install the fuel sub-tank sub-assembly.


e.
A395937

Engage the 2 clamps and install the fuel pump harness to the fuel suction tube with pump and gauge assembly.


f.

Connect the fuel pump harness 2 connectors.


Hide 83320 2.INSTALL FUEL SENDER GAUGE ASSEMBLY