Home › Engine / Hybrid System › 2ZR-FXE (FUEL) › FUEL SENDER GAUGE ASSEMBLY
RM32K0E _51 Engine / Hybrid System _060063 2ZR-FXE FUEL _0294220 FUEL SENDER GAUGE ASSEMBLY A

2ZR-FXE FUEL  FUEL SENDER GAUGE ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 83320 1.INSTALL FUEL SENDER GAUGE ASSEMBLY

a.

Engage the claw to install the fuel sender gauge assembly to the fuel suction tube with pump and gauge assembly.

NOTICE:

Be careful not to bend the arm of the fuel sender gauge assembly.



b.

Engage the 3 clamps to connect the wire harness.

NOTICE:

Do not damage the wire harness.



c.

Connect the fuel sender gauge assembly connector.


Hide 77020A 2.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY