51441
1.REMOVE NO. 1 ENGINE UNDER COVER
2.DRAIN ENGINE COOLANT (for Engine)
25610
3.REMOVE EGR PIPE ASSEMBLY
16296
4.DISCONNECT NO. 8 WATER BY-PASS HOSE
Slide the clip and disconnect the No. 8 water by-pass hose from the No. 3 water by-pass pipe.
16297
5.DISCONNECT NO. 9 WATER BY-PASS HOSE
Slide the clip and disconnect the No. 9 water by-pass hose from the No. 3 water by-pass pipe.
17650G
6.REMOVE PURGE VALVE (PURGE VSV)
| *1 | No. 1 Fuel Vapor Feed Hose |
| *2 | No. 2 Fuel Vapor Feed Hose |
Disconnect the purge valve (purge VSV) connector.
Disconnect the No. 1 fuel vapor feed hose from the purge valve (purge VSV).
Disconnect the No. 2 fuel vapor feed hose from the purge valve (purge VSV).
Remove the bolt and No. 3 water by-pass pipe from the camshaft housing sub-assembly.
Remove the screw and purge valve (purge VSV) from the No. 3 water by-pass pipe.