Home › Engine / Hybrid System › 2ZR-FXE (COOLING) › COOLING FAN MOTOR
RM32K0E _51 Engine / Hybrid System _060780 2ZR-FXE COOLING _0298029 COOLING FAN MOTOR A

2ZR-FXE COOLING  COOLING FAN MOTOR  INSTALLATION  


PROCEDURE

Hide 16363G 1.INSTALL COOLING FAN MOTOR LH

a.

Install the cooling fan motor LH with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


b.

Engage the 3 clamps.


Hide 16363F 2.INSTALL COOLING FAN MOTOR RH

a.

Install the cooling fan motor RH with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16361K 3.INSTALL FAN LH

NOTICE:

Do not reverse the position of the fan LH and fan RH when installing them. Doing so may damage the parts.


a.

Install the fan LH with the nut.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 16361J 4.INSTALL FAN RH

NOTICE:

Do not reverse the position of the fan LH and fan RH when installing them. Doing so may damage the parts.


a.

Install the fan RH with the nut.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 16400 5.INSTALL RADIATOR ASSEMBLY