48069
1.INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY
Temporarily install the front lower No. 1 suspension arm sub-assembly LH to the front suspension crossmember sub-assembly with the 2 bolts and nut.
Install the front lower No. 1 suspension arm sub-assembly LH to the front lower ball joint assembly LH with the bolt and 2 nuts.
2.INSTALL FRONT WHEEL
3.STABILIZE SUSPENSION
48069
4.FULLY TIGHTEN FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY
Fully tighten the front lower No. 1 suspension arm sub-assembly with the 2 bolts.
Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.
51444A
5.INSTALL REAR ENGINE UNDER COVER LH
51441
6.INSTALL NO. 1 ENGINE UNDER COVER
7.INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
8.INITIALIZATION HEADLIGHT ECU SUB-ASSEMBLY