Home › Vehicle Interior › LIGHTING (INT) › AMBIENT LIGHT
RM32K0E _58 Vehicle Interior _062037 LIGHTING (INT) _0302288 AMBIENT LIGHT A

LIGHTING (INT)  AMBIENT LIGHT  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for LHD and RHD vehicles.

·

The procedure described below is for the LHD vehicles.

·

Use the same procedure as for the LH and RH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 81080S 1.INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY

a.
E357034C02
0.24,1.104 0.24,0.771 true 1.083,1.771 1.083,1.438 true 1.5,1.948 1.5,1.615 true 2.344,2.042 2.094,1.823 true 1.229,0.667 0.896,0.667 true 1.24,0.552 1.458,0.708 0.219,0.156 10 true *a 0.177,1.104 0.385,1.26 0.208,0.156 10 true *b 1,1.771 1.208,1.927 0.208,0.156 10 true *b 1.427,1.948 1.635,2.104 0.208,0.156 10 true *b 2.354,1.948 2.563,2.104 0.208,0.156 10 true *b
*a Clamp
*b Guide


Engage the claws to install the No. 1 interior illumination light assembly.


b.

Install the 2 screws.


c.

Engage the guides and clamp to connect the wire harness.


Hide 67602 2.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

Hide 69284C 3.INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

Hide 74232 4.INSTALL FRONT ARMREST BASE UPPER PANEL (for Driver Side)

Hide 74232 5.INSTALL FRONT ARMREST BASE UPPER PANEL (for Front Passenger Side)