Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM › 2016.10–2019.09
RM32K0E _59 Vehicle Exterior _061162 LIGHTING (EXT) _0303369 LIGHTING SYSTEM J

LIGHTING (EXT)  LIGHTING SYSTEM  Headlight Dimmer Switch Circuit  


DESCRIPTION

The main body ECU (multiplex network body ECU) receives the following switch information:

·

Light control switch in tail, head or AUTO position

·

Dimmer switch in high, low or high flash (pass) position

·

Fog light switch in front*1, rear or off position


*1: w/ Front Fog Light


WIRING DIAGRAM

E352153E01
1.615,1.813 2.146,2.417 0.531,0.604 10 false Dimmer Switch 1.031,4.406 1.833,4.99 0.802,0.583 10 false Light Control Switch 1.344,7 1.948,7.573 0.604,0.573 10 false Fog Light Switch 2.365,1.74 2.802,2 0.438,0.26 10 false Flash 2.417,2.146 2.854,2.406 0.438,0.26 10 false Low 2.406,2.531 2.844,2.792 0.438,0.26 10 false High 3,1.406 3.323,1.625 0.323,0.219 10 false EL 3.438,1.406 3.76,1.625 0.323,0.219 10 false (HL) 3.917,1.406 4.24,1.625 0.323,0.219 10 false HU 4.354,1.406 4.677,1.625 0.323,0.219 10 false HF 4.729,1.052 5.052,1.271 0.323,0.219 10 false HF 4.719,0.74 5.042,0.958 0.323,0.219 10 false HU 5.979,0.76 6.302,0.979 0.323,0.219 10 false HU 5.979,1.073 6.302,1.292 0.323,0.219 10 false HF 5,0.75 5.323,0.969 0.323,0.219 10 false 14 5.01,2.865 5.333,3.083 0.323,0.219 10 false 18 5.74,0.771 6.063,0.99 0.323,0.219 10 false 24 5.729,1.073 6.052,1.292 0.323,0.219 10 false 10 6.604,0.25 6.927,0.469 0.323,0.219 10 false +B 4.813,2.865 5,3.073 0.188,0.208 10 false T 4.802,3.188 4.99,3.396 0.188,0.208 10 false H 4.792,3.552 4.979,3.76 0.188,0.208 10 false A 5.99,3.552 6.177,3.76 0.188,0.208 10 false A 5.979,3.208 6.49,3.406 0.51,0.198 10 false HEAD 5.969,2.854 6.479,3.052 0.51,0.198 10 false TAIL 5,3.188 5.323,3.406 0.323,0.219 10 false 19 5.021,3.563 5.344,3.781 0.323,0.219 10 false 20 5.74,2.875 6.063,3.094 0.323,0.219 10 false 22 5.74,3.198 6.063,3.417 0.323,0.219 10 false 12 5.781,3.542 6.104,3.76 0.323,0.219 10 false 8 3.479,4.031 3.667,4.24 0.188,0.208 10 false T 3.948,4.042 4.135,4.25 0.188,0.208 10 false H 4.406,4.042 4.594,4.25 0.188,0.208 10 false A 2.99,4.021 3.313,4.24 0.323,0.219 10 false EL 2.198,4.417 2.719,4.625 0.521,0.208 10 false AUTO 2.26,4.792 2.781,5 0.521,0.208 10 false Tail 2.229,5.146 2.74,5.354 0.51,0.208 10 false Head 2.281,6.927 2.604,7.135 0.323,0.208 10 false Off 2.135,7.26 2.698,7.479 0.563,0.219 10 false Front*1 2.219,7.646 2.635,7.854 0.417,0.208 10 false Rear 2.719,6.625 3.042,6.833 0.323,0.208 10 false LFG 3.146,6.635 3.469,6.844 0.323,0.208 10 false BFG 3.646,6.635 3.969,6.844 0.323,0.208 10 false B 4.792,6.25 5.115,6.458 0.323,0.208 10 false B 4.51,5.875 5.031,6.073 0.521,0.198 10 false BFG*1 5.01,6.229 5.333,6.438 0.323,0.208 10 false 7 5,5.875 5.323,6.083 0.323,0.208 10 false 9 5.729,5.896 6.052,6.104 0.323,0.208 10 false 26 5.729,6.25 6.052,6.458 0.323,0.208 10 false 23 5.99,5.875 6.635,6.073 0.646,0.198 10 false FFOG*1 5.99,6.25 6.635,6.448 0.646,0.198 10 false RFOG 5.448,6.844 5.771,7.052 0.323,0.208 10 false F15 5.448,7.042 7.083,7.51 1.635,0.469 10 false Main Body ECU (Multiplex Network Body ECU) 5.177,7.927 6.813,8.396 1.635,0.469 10 false *1: w/ Front Fog Light 0.448,7.865 0.771,8.073 0.323,0.208 10 false LFG 0.438,5.49 0.76,5.708 0.323,0.219 10 false EL 0.208,5.5 0.531,5.719 0.323,0.219 10 false 15 0.25,7.896 0.573,8.104 0.323,0.208 10 false 8 1.49,8.417 4.021,8.688 2.531,0.271 10 false F24 Headlight Dimmer Switch Assembly 5,1.063 5.323,1.281 0.323,0.219 10 false 17

CAUTION / NOTICE / HINT

NOTICE:

Before replacing the main body ECU (multiplex network body ECU), refer to Service Bulletin.


PROCEDURE

1.READ VALUE USING GTS
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Main Body / Data List.


e.

Read the Data List according to the display on the GTS.

Body Electrical > Main Body > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Dimmer SW Dimmer switch high position signal ON or OFF ON: Dimmer switch in high or high flash position
OFF: Dimmer switch in low position
-
Passing Light SW Dimmer switch high flash position (pass) signal ON or OFF ON: Dimmer switch in high flash position
OFF: Dimmer switch not in high flash position
-
Rear Fog Light SW Fog light switch rear position signal ON or OFF ON: Fog light switch in rear position
OFF: Fog light switch off
-
Front Fog Light SW Fog light switch front position signal ON or OFF ON: Fog light switch in front position
OFF: Fog light switch off
*1
Auto Light SW Light control switch AUTO position signal ON or OFF ON: Light control switch in AUTO position
OFF: Light control switch not in AUTO position
-
Head Light SW (Head) Light control switch head position signal ON or OFF ON: Light control switch in head position
OFF: Light control switch not in head position
-
Head Light SW (Tail) Light control switch tail position signal ON or OFF ON: Light control switch in tail or head position
OFF: Light control switch not in tail or head position
-

*1: w/ Front Fog Light


Body Electrical > Main Body > Data List
Tester Display
Dimmer SW
Passing Light SW
Rear Fog Light SW
Front Fog Light SW
Auto Light SW
Head Light SW (Head)
Head Light SW (Tail)
50003 123 54,55,56,57,58,59,60
OK:

Normal conditions listed above are displayed.



Result:
Proceed to
OK
NG



OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

2.INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY
2.INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY
HINT:

Inspect the items that did not change when reading the Data List.


a.

Remove the headlight dimmer switch assembly.

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT DIMMER SWITCH>REMOVAL


b.

Inspect the headlight dimmer switch assembly.

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT DIMMER SWITCH>INSPECTION


Result:
Proceed to
OK
NG



OK

3.CHECK HARNESS AND CONNECTOR (HEADLIGHT DIMMER SWITCH ASSEMBLY - MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU))

NG

REPLACE HEADLIGHT DIMMER SWITCH ASSEMBLY

3.CHECK HARNESS AND CONNECTOR (HEADLIGHT DIMMER SWITCH ASSEMBLY - MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU))
a.

Disconnect the F15 main body ECU (multiplex network body ECU) connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F24-9 (BFG) - F15-26 (FFOG)*1 Always Below 1 Ω
F24-7 (B) - F15-23 (RFOG) Always Below 1 Ω
F24-14 (HU) - F15-24 (HU) Always Below 1 Ω
F24-17 (HF) - F15-10 (HF) Always Below 1 Ω
F24-18 (T) - F15-22 (TAIL) Always Below 1 Ω
F24-19 (H) - F15-12 (HEAD) Always Below 1 Ω
F24-20 (A) - F15-8 (A) Always Below 1 Ω
F24-9 (BFG) or F15-26 (FFOG) - Body ground*1 Always 10 kΩ or higher
F24-7 (B) or F15-23 (RFOG) - Body ground Always 10 kΩ or higher
F24-14 (HU) or F15-24 (HU) - Body ground Always 10 kΩ or higher
F24-17 (HF) or F15-10 (HF) - Body ground Always 10 kΩ or higher
F24-18 (T) or F15-22 (TAIL) - Body ground Always 10 kΩ or higher
F24-19 (H) or F15-12 (HEAD) - Body ground Always 10 kΩ or higher
F24-20 (A) or F15-8 (A) - Body ground Always 10 kΩ or higher
F24-15 (EL) - Body ground Always Below 1 Ω
F24-8 (LFG) - Body ground Always Below 1 Ω


*1: w/ Front Fog Light



Result:
Result Proceed to
OK (for LHD) A
OK (for RHD) B
NG C



A

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

B

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

C

REPAIR OR REPLACE HARNESS OR CONNECTOR