Use the same procedure for RHD and LHD vehicles.
The following procedure is for LHD vehicles.
73480
1.INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH
| *a | Protruding Part |
Tighten the bolt and install the rear seat inner with center belt assembly LH.
Do not allow the anchor part of the rear seat inner with center belt assembly LH to overlap the protruding parts of the vehicle body.
Engage the clamp.
Connect the 2 connectors.
72693
2.INSTALL REAR SEAT CUSHION LOCK HOOK
3.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY
73350C
4.CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY