Use the same procedure for RHD and LHD vehicles.
The following procedure is for LHD vehicles.
73705B
1.INSTALL CROSS ANCHOR BRACKET SUB-ASSEMBLY (for LH Side)
Temporarily install the cross anchor bracket sub-assembly with the 2 bolts.
Tighten the 2 bolts in the order shown in the illustration.
Engage the clamp.
73705B
2.INSTALL CROSS ANCHOR BRACKET SUB-ASSEMBLY (for RH Side)
Temporarily install the cross anchor bracket sub-assembly with the 2 bolts.
Tighten the 2 bolts in the order shown in the illustration.
72693
3.INSTALL REAR SEAT CUSHION LOCK HOOK
4.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY
73350C
5.CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY